NAME : Barman Tambunan

POSITION : Head of Alloy Metal Division – Center for Materials Technology BPPT

DATE OF BIRTH : 12 October 1967

PLACE OF BIRTH : West Berlin, Germany

TELEPHONE : (021) 3169892 (direct), (021) 3169868

FAX : (021) 3169873

EMAIL : barman@rumahcor.com, barman@webmail.bppt.go.id

 

EDUCATION QUALIFICATION :

Propadeus

Werktuigbouwkunde (Mechanical Engineering)

Technische Universiteit Delft (TU Delft)

Delft – NETHERLANDS

Ingenieur (Ir)

Werktuigbouwkunde (Mechanical Engineering)

Vakgroep Tribotechniek

Technische Universiteit Delft (TU Delft)

Delft – NETHERLANDS

Master of Science in Mechanical Engineering (MSc.Eng)

Tribology Department

Faculty of Mechanical Engineering

Delft University of Technology (TU Delft)

Delft – NETHERLANDS

Thesis: Analysis of Compressible Lubrication in Aerodynamic Slider Bearing Using the Finite Element Method

Doctor of Philosophy (Ph.D)

School of Aerospace, Mechanical and Manufacturing Engineering

Royal Melbourne Institute of Technology University (RMIT University)

Melbourne – AUSTRALIA

Thesis: Theoretical and Experimental Analyses of Solidification Temperature and Hydrodynamic Lubrication in Continuous Casting Process

 

COURSES and SEMINAR

• 4^th  to 8^th  September 1995

The Seminar on Safety Technology of Process Plant        

The High Pressure Gas Safety Institute of Japan

BPPT – Jakarta - INDONESIA

 

• July 1999

FASTFLO (FINITE ELEMENT SOFTWARE) COURSE

CSIRO – Sydney - AUSTRALIA

 

• 4^th  - 5^th  August 2004

Technopreneurship Training

BPPT – Jakarta - INDONESIA

 

• 12^th  – 13^th  May 2005

ASEAN Technology Foresight and Scan Final Workshop

Amari Watergate Hotel, Bangkok, Thailand

Organized by APEC Center for Technology Foresight Thailand’s National Science and Technology Development Agency, THAILAND

 

• 29^th  – 30^th  November 2005

National Workshop on Technology Needs Assessment for Developing Countries, Organized by UNIDO and KMNRT Jakarta. BPPT – Jakarta - INDONESIA

 

• 11^th  – 13^th  October 2006

Three Days Course on CATIA (Finite Element and Solid Modelling).

PT Nusantara Secom Infotech (IT Solution Center), Menara Jamsostek, Jakarta – INDONESIA

 

• 6^th  – 7^th  February 2007

Two Days Course on CATIA (Finite Element and Solid Modelling).

PT Nusantara Secom Infotech (IT Solution Center), Menara Jamsostek, Jakarta – INDONESIA

 

• 7^th – 17^th July 2008

Corrosion Inspector Training and Certification Program,

National Cert. DEPNAKER –RI No. 089606, Indonesian Corrosion Association, Bandung – Indonesia. (No. 005/Corr.Insp/A.5/VII/2008)

 

• 10^th – 16^th December 2008

Associate Welding Engineer Training Course,

Japan Welding Engineering Society, JWES, Depok – Indonesia. (Reg No. ID-2080054)

PUBLISHED BOOKS/PAPERS :

Barman Tambunan, Analysis of Compressible Lubrication in Aerodynamic Slider Bearing Using The Finite Element Method, Master Thesis, Vakgroep Tribotechniek, Faculteit der Werktuigbouwkunde, TU Delft, Nederland, March 7^th, 1994

Barman Tambunan, S.M. Mahdavian, M. Nawaz, Bernard K. Chen, “Frictional Forces Between Strand and Mould in Continuous Casting of Wax Billets with Mould Oil Lubrication”, Borland Research Forum 2002, BHP Billiton Head Office, Melbourne, Australia, August, 22^nd 2002

Barman Tambunan, S.M. Mahdavian, Bernard K. Chen, ‘Development of a Continuous Casting Process Rig to Study the Production Parameter’, The International Conference on Manufacturing Excellence 2003, ICME 2003, Melbourne, Australia, October, 13^th – 15^th 2003

Barman Tambunan, Bernard K. Chen, S.M. Mahdavian, ‘Heat Transfer Solidification Models of the Continuous Casting Process’, International Seminar on AEROSPACE TECHNOLOGY, AerospaceTech 2003, Yogyakarta Indonesia, July 22^nd - 23^rd 2003

Utama H. Padmadinata, Ardito M. Kodijat, Derry Pantjadarma, Barman Tambunan, Muhammad Kozin, ‘Technology Roadmap for Automotive Components Industry in Indonesia’, Foresight Centre Bangkok, http://www.apecforesight/org, August 2004

Barman Tambunan, ‘Kajian Teknologi Material Otomotif’, Laporan Akhir Tolok Ukur, Proyek Jaringan Informasi dan Teknologi (JITI), Badan Pengkajian dan Penerapan Teknologi, January 2005

Barman Tambunan, Theoretical and Experimental Analyses of Solidification Temperature and Hydrodynamic Lubrication in Continuous Casting Process, PhD Thesis, School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Melbourne – Australia, March 2005

Utama H. Padmadinata, Barman Tambunan, Dwi Gustiono, Ardito M. Kodijat, Derry Pantjadarma, ‘Technology Roadmap of Automotive Components Industry in Indonesia’, Asean Technology Foresight and Scan Final Workshop, Organized by APEC Center for Technology Development Agency, Bangkok, Thailand, May 12^th -13^th 2005

Barman Tambunan, S.M. Mahdavian, “Simulation of Heat Transfer Solidification in Continuous Casting Process”, Proceeding Sematek 2005, ITS Surabaya, Indonesia, ISBN 979-98620-1-9, June 9^th 2005

Barman Tambunan, “Experimental Study of the Thermal Hydrodynamic Lubrication in Continuous Casting Mould”, The 2^nd ASEAN Science Congress and Sub Committee Conference on Material Science and Technology, Jakarta, Indonesia, August 5-7^th, 2005

Barman Tambunan, “Mathematical Modelling of Thin Film Thickness of Liquid Mould Powder in the Continuous Casting Process”, Workshop on Computational science 2K5, FMIPA UGM Yogyakarta, Indonesia, September 8^th, 2005

Barman Tambunan, “Solidification Analysis of Bismuth Based Alloy in Continuous Casting Process”, Seminar Nasional Revitalisasi Penelitian Bidang Matematika dan Ilmu Pengetahuan Alam, FMIPA Universitas Gajah Mada, Yogyakarta, Indonesia, ISBN 979-95117-1-2, September 17^th, 2005

Barman Tambunan, ““Solidification Analysis of Bismuth Based Alloy in Continuous Casting Process”, Berkala Ilmiah MIPA, UGM, Yogyakarta, Vol 15, No. 3, 2005, pp. 33 - 43

Barman Tambunan, “Analysis of Casting Speed Effect on the Heat Transfer Solidification in the Continuous Casting Mould”, Seminar Nasional Tahunan Teknik Mesin IV, SNTTM IV, Hotel THE PATRA BALI Resort and Villas, Kuta Bali Indonesia, November 21^st – 22^nd 2005

Barman Tambunan, “Simulation of Heat Transfer Solidification with Improved Latent Heat Parameter in Continuous Casting”, Seminar Nasional MIPA 2005. FMIPA Universitas Indonesia Depok – Mempercepat Terwujudunya Universitas Riset, November, 24^th – 26^th 2005

Barman Tambunan, “Pemetarencanaan Untuk Komponen Otomotif di Indonesia Dalam Rangka Menembus Pasar Industri Otomotif”, Laporan Akhir Tolok Ukur, Pusat Pengkajian dan Penerapan Teknologi Material – BPPT, Jakarta Indonesia, Jan 31^st 2006.

Barman Tambunan, “Effect of Mould Lubrication on Wood’s Metal Solidification Temperature in the Continuous Casting”, Seminar Nasional Gabungan, Universitas Gajah Mada, Yogyakarta, Indonesia, June 27^th, 2006

Barman Tambunan, “Prediction of Mould Film Thickness in the Bismuth Based Alloy Continuous Casting Process”, Pertemuan Ilmiah Iptek Bahan 2006, Peranan Litbangtek Bahan Industri Nuklir dalam Era Nanoteknologi, PUSPIPTEK Serpong Tangerang Indonesia, 18^th -19^th Juli 2006

Barman Tambunan, “Shell Thickness Prediction for Solidified Steel Slab Using Finite Element Method”, Semiloka Teknologi Simulasi dan Komputasi Serta Aplikasi, PTIK – BPP Teknologi, Jakarta Indonesia, Sept. 19^th 2006

Barman Tambunan, “Hydrodynamic Lubrication Flow Analysis of the Mould Flux in the Continuous Casting Process”, Seminar Nasional Simulasi dan Optimasi untuk Aplikasi Industri Proses, Manufaktur dan Energi, Fakultas Teknik UGM, Yogyakarta Indonesia, Sept 21^st 2006

Barman Tambunan, “A Refined Thermal Reynolds Analysis to Estimate the Lubricant Film Thickness at the Mould Inlet Region of a Continuous Casting Process”, Seminar Nasional Tahunan Teknik Mesin V, Departemen Teknik Mesin, FTUI, Jakarta – Indonesia, November 21^st – 23^rd, 2006

Barman Tambunan, “A Numerical Model and Experimental Study of the Lubrication in Continuous Casting Mould Region”, International Seminar on Product Design and Development 2006, Ruang Sidang II, KPTU FT UGM, Yogyakarta, Indonesia, December 13^th – 14^th , 2006

Barman Tambunan, “Frictional Forces Analysis During Bismuth Based Alloy Billet Withdrawal in the Continuous Casting Process”, Seminar Nasional V Rekayasa dan Aplikasi Teknik Mesin di Industri, Gedung FTI dan FTSP Lantai II, Kampus ITENAS, Bandung – Indonesia, December 19^th - 20^th 2006.

Barman Tambunan, “Pembuatan Kendaraan Angkutan Pedesaan”, Laporan Akhir Kegiatan DIPA BPPT TA 2006, January 31^st, 2007

Barman Tambunan, ”Pemanfaatan Logam Paduan Stainless Steel Tipe SS 316 Berbasis Bahan Baku Lokal Untuk Aplikasi Kesehatan Pada Pembuatan Tulang Buatan”, Laporan akhir program insentif Ristek TA 2007, November 22^nd, 2007

Barman Tambunan, Muhammad Kozin, Joni Sah, Farid Rizayana, ”Kajian Pengembangan Industri Komponen Dalam Mendukung Industri Permesinan”, Laporan Akhir Kegiatan Kajian DEPERIN TA 2007 bekerjasama dengan PT Sucofindo, October 31^st, 2007

Barman Tambunan et all, Pengembangan Logam Paduan dan Komposit Kinerja Tinggi, Laporan Akhir Program DIPA BPPT 2007, March 2008

 Barman Tambunan, “Lubricant Film Thickness Estimation at the Mould Inlet Region of a Continuous Casting Process”, The 3rd Indonesia Fuel and Lube Conference and Exhibition, Hotel JW Marriott Jakarta, 18^th – 19^th November 2008

 Barman Tambunan, I Nyoman Jujur, Hadi P Sulaikan, Muhammad Kozin, Ferdiansyah,  “Aplikasi Stainless Steel SS316L Berbasis Bahan Baku Lokal Untuk Aplikasi Pada Implant/Tulang Buatan”, Seminar Material Metalurgi 2008, Graha Widya Bakti DRN Kawasan Puspiptek Serpong Tangerang, 18^th December 2008